Follow

How to connect with your beacon?

To connect with your beacon you will have to use/download Sensorbergs BeaCfg App (for iOS or Android ). (Note: Currently, BeaCfg allows you to make changes to Accent Systems iBKS105 and USB). 

The BeaCfg app provides you an easy way to configure hardware changes such as Major, Minor or UUID, broadcast interval and transmission power. 

For security reasons, our beacons prevent unauthorized access after 5 minutes. To re-enable the configuration, simply follow these steps:

Accent Systems iBKS102 (old model)

  1. Remove the screws on the backside of the beacon
  2. Press the small configuration mode button
  3. You will now have 5minutes time to connect to the Beacon and apply desired changes
  4. Close the beacon and retighten screws

Accent Systems iBKS105

  1. Turn the top of the beacon to right
  2. Remove the top
  3. Take out the battery
  4. Wait 10 seconds
  5. Re-insert the battery
  6. You will now have 5minutes time to connect to the Beacon and apply desired changes
  7. Close the beacon
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Back to top

Comments